Featured Products
Diesel Engine Crankshafts for Heavy Equipment
The crankshaft is one of the most important internal components of a diesel engine. Located in the lower section of the engine block, it works with the pistons and connecting rods to convert reciprocating piston movement into rotational power. This rotation drives the flywheel and allows the engine to power a vehicle, construction machine, generator or other equipment.
Diesel engine crankshafts must withstand high combustion pressure, continuous vibration and heavy operating loads. Depending on the engine design, they may be manufactured from forged alloy steel or high-strength cast material. Precisely machined journals, balanced counterweights and hardened working surfaces help provide reliable performance and extended service life.
4BTdiesel supplies replacement crankshafts for diesel engines used in construction equipment, trucks, agricultural machines, generators, industrial equipment and marine applications. Browse available products by engine model and part number, or explore more diesel engine parts for your repair or rebuilding project.
Popular Crankshaft Searches
Cummins crankshaft, Caterpillar crankshaft, Komatsu engine crankshaft, Perkins crankshaft, Isuzu crankshaft, Kubota crankshaft, Yanmar crankshaft, John Deere crankshaft, Deutz crankshaft, Mitsubishi crankshaft and Volvo diesel engine crankshaft.
What Does an Engine Crankshaft Do?
During engine operation, combustion pressure pushes each piston downward inside the cylinder. The connecting rods transfer this force to the crankshaft’s rod journals, causing the crankshaft to rotate.
The crankshaft performs several essential functions:
- Converts piston movement into rotational power
- Transfers engine power to the flywheel
- Helps drive the transmission, generator or connected equipment
- Supports the connecting rods and pistons during combustion
- Uses counterweights to reduce vibration and improve engine balance
- Distributes lubricating oil through internal oil passages
- Drives timing gears and other engine accessories in some applications
Because the crankshaft is continuously exposed to pressure, friction and bending forces, correct lubrication, bearing clearance and installation are essential.
Main Parts of a Diesel Engine Crankshaft
A typical crankshaft includes several precision-machined areas:
Main journals: Support the crankshaft inside the engine block and rotate within the main bearings.
Rod journals or crankpins: Connect the crankshaft to the connecting rods and convert piston movement into rotation.
Counterweights: Balance the rotating assembly and help reduce engine vibration.
Oil passages: Deliver lubricating oil to the main and connecting rod bearings.
Crankshaft flange: Connects the rear of the crankshaft to the flywheel.
Crankshaft nose: Supports the timing gear, pulley, vibration damper or other front-mounted components.
The dimensions and arrangement of these features vary between engine models, so crankshafts that appear similar are not necessarily interchangeable.
Compatible Diesel Engine Brands
4BTdiesel helps customers source replacement crankshafts for many popular diesel engine and equipment applications, including:
- Caterpillar and CAT
- Cummins
- Deutz
- Hino
- Hitachi
- Hyundai
- Isuzu
- John Deere
- Kobelco
- Komatsu
- Kubota
- Mitsubishi
- Perkins
- Volvo
- Yanmar
- Other industrial diesel engine brands
Visit our parts by brand page to browse more replacement parts for the engines and equipment you service.
Common Crankshaft Applications
Our diesel engine crankshafts can be used in many types of equipment, including:
- Excavators
- Bulldozers
- Wheel loaders
- Backhoe loaders
- Motor graders
- Skid steer loaders
- Forklifts
- Agricultural tractors
- Heavy-duty trucks
- Diesel generators
- Industrial equipment
- Marine engines
Availability and compatibility depend on the engine model and part number.
Signs of a Damaged or Worn Crankshaft
A worn or damaged crankshaft may affect the entire engine rotating assembly. Common warning signs include:
- Knocking or hammering noises from the lower engine
- Low or unstable engine oil pressure
- Excessive engine vibration
- Metal particles found in the engine oil
- Scored, cracked or discolored crankshaft journals
- Repeated main or connecting rod bearing failure
- Irregular crankshaft end play
- Oil leakage around the front or rear crankshaft seal
- Difficulty rotating the crankshaft during an engine rebuild
These symptoms may also be related to worn bearings, damaged connecting rods, inadequate lubrication or incorrect assembly. The crankshaft should be properly inspected and measured before replacement.
How to Choose the Correct Replacement Crankshaft
Accurate fitment is essential when purchasing a diesel engine crankshaft. Before ordering, confirm as much of the following information as possible:
- Original or OEM reference part number
- Engine brand and complete engine model
- Engine serial number
- Cummins CPL number, when applicable
- Machine make and model
- Main and connecting rod journal dimensions
- Crankshaft gear, flange and nose configuration
- Required main and connecting rod bearing sizes
Do not select a crankshaft based only on its appearance. Different engine versions may use crankshafts with similar overall shapes but different journal sizes, oil passages, gear arrangements or flywheel connections.
If the original part number cannot be found, send clear photos and measurement information to the 4BTdiesel parts team.
Crankshaft Installation and Rebuild Tips
Before installing a replacement crankshaft, inspect the cylinder block, main bearing bores, connecting rods, oil pump and lubrication passages. Check the journal diameters, bearing clearances, crankshaft end play and connecting rod alignment according to the engine service specifications.
Main bearings, connecting rod bearings, thrust washers, oil seals and related gaskets should also be inspected or replaced when necessary. Clean all oil passages thoroughly and apply the correct assembly lubricant before starting the rebuilt engine.
Incorrect bearing clearance, insufficient lubrication or contaminated engine oil can quickly damage a new crankshaft.
Why Buy Diesel Engine Crankshafts from 4BTdiesel?
Extensive diesel engine coverage: We help source crankshafts for many popular heavy-duty engine brands and equipment applications.
Part-number matching: Our team can help check compatibility using your crankshaft number, engine model, serial number, CPL or machine information.
Reliable replacement solutions: Products are selected to meet practical repair and engine rebuilding requirements.
Competitive pricing: We provide cost-effective crankshaft options for equipment owners, repair shops, engine rebuilders, dealers and parts distributors.
Related rebuild components: Customers can also source connecting rods, bearings, pistons, cylinder liners, oil pumps, gasket kits and other engine rebuilding parts.
Need help finding the correct crankshaft? Contact 4BTdiesel and provide your part number, engine model, engine serial number or clear photos of the original component.
